8 Ways to Fix the DNS_PROBE_FINISHED_NXDOMAIN Error
1. Flush the DNS Cache
- For windows users, open CMD as administrator and run command ipconfig /flushdns
- For mac users, open terminal and run command sudo dscacheutil -flushcache; sudo killall -HUP mDNSResponder
2. Release and Renew the IP Address
Open command prompt as an administrator and run below commands
ipconfig /release
ipconfig /renew
Use below commands to reset previous IP setting
netsh int ip set dns
netsh winsock reset
Restart computer or laptop. Check whether DNS_PROBE_FINISHED_NXDOMAIN Error resolved.
For macOS user follow below process
Go to System Preferences -> Network
Select current network
Advance
TCP/IP tab and click Renew DHCP Lease. Press OK
Restart computer or laptop. Check whether DNS_PROBE_FINISHED_NXDOMAIN Error resolved.
3. Change your DNS Servers
For windows users follow below method to change your DNS
- Open the Control Panel -> Network and Internet -> Network and Sharing Center.
- On the left side of the window, click Change adapter settings.
- Right-click on the current connection and choose Properties.
- Choose Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) and press the Properties button.
- At the bottom of the window, select Use the following DNS server addresses and insert the numbers below:
Preferred DNS Server
8.8.8.8 for IPv4
2001:4860:4860::8888 for IPv6
Alternate DNS Server
8.8.4.4 for IPv4
2001:4860:4860::8844 IPv6
Click ok to save the changes and check whether DNS_PROBE_FINISHED_NXDOMAIN Error is resolved by reopening website in the browser.
For macOS users follow below method to change your DNS
Go to System Preferences -> Network
Select current network
Advance
Go to DNS tab
Press the + button to add new DNS details.
Check whether DNS_PROBE_FINISHED_NXDOMAIN Error is resolved by opening browser.
4. Restart the DNS Client Service
Open command prompt as an administrator and run below commands to restart DNS client service.
net stop dnscache
net start dnscache
Restart the computer/laptop once service started.
5. Check the Local Hosts File
For Windows
Go to C:\Windows\System32\drivers\etc\ path
Open hosts file as an administrator
Check for domain and IP mapping for inaccessible sites.
If available, remove and save,
Check whether the error is resolved.
For macOS
Open terminal
sudo nano /private/etc/hosts
Remove sites which are not accessible
Command + O to save.
Command + X to exit.
6. Disable Antivirus or VPN
For Windows
Open Settings -> Network & Internet -> VPN.
Select the VPN service you’re using and click Disconnect.
Restart computer or laptop.
For macOS
Open System Preferences -> Network.
On the left side of the window, select the VPN connection you want to turn off.
Click Disconnect and Apply to save changes.
7. Temporarily Turn Off Your CDN
Turning off your CDN setting will clear Cached IP details. It may resolve the issue.
If you are using cloud flare CDN services then go to cloud flare dashboard and click on Pause Cloudflare on Site button.
8. Reboot Internet Connection
Power off the home router and wait for 1 min.
Power on the home router and after some time check whether websites are accessible.
What is DNS used for?
DNS is used to provide IP address from human readable domain name. Example- google.com to 8.8.8.8
What is DNS and how it is work?
DNS is domain name systems which is one of the critical components for internet. It is like phone book for internet. It provides IP address from human readable domain name. Example- google.com to 8.8.8.8
What are the 3 types of DNS?
Cache DNS, secondary ADNS and Primary ADNS. Apart from this there is root DNS as well.
Should I use 8.8 8.8 DNS?
You can use it for personal use purpose but not recommended to use for commercial business purpose. It will not ensure required SLA.
How do I setup a DNS server?
For Windows
Go to the Control Panel.
Click Network and Internet > Network and Sharing Center > Change adapter settings.
Select the connection for which you want to configure Google Public DNS. …
Select the Networking tab.
Click Advanced and select the DNS tab.
Click OK.
Select Use the following DNS server addresses.
For linux
Configure DNS under /etc/resolve.conf
Nameserver IP
save and exit
What are the types of DNS?
Cache DNS, secondary DNS and Primary DNS. Apart from this there is root DNS as well.
What is DNS zone example?
DNS zone is like sub directory where all the records are stored. E.g. example.com info.example.com and support.example.com so on..
What are the 4 DNS servers?
Cache DNS, secondary DNS and Primary DNS. Apart from this there is root DNS as well.
Is DNS a protocol?
Yes, DNS is an application layer protocol.
Does 1.1 1.1 hide your IP?
Its cloud flare provided free DNS to all. As per cloud flare it provide security and faster browsing experience.
Does 1.1 1.1 Make your internet faster?
Cloud flare claims, it is the fasted DNS resolver available for free. But actual user experience may be different.
Which is the fastest DNS server?
Cloud flare claims, it is the fasted DNS resolver available for free.
How many DNS servers are there?
There are total 13 root DNS servers across the world.
What is primary DNS server?
Primary DNS server is main database where DNS records are configured.
What are DNS records?
There are many type of DNS records available most commonly used DNS records are A records for IPv4 address, AAAA records for IPv6 address and CNAME for domain redirection.
Where are DNS files stored?
DNS files are called zone files. It is located at primary authoritative DNS server.
What is master DNS server?
Master DNS server is primary authoritative DNS server where zone files are kept.
What are the two types of DNS queries?
Recursive and iterative queries.
How do I find my DNS server IP?
Open the “Command Prompt” and type “ipconfig /all”. Find the IP address of the DNS
What’s a private DNS?
Private DNS may be available at android phone which will secure DNS transaction.
What is nslookup?
Nslookup is the command in windows system to check DNS resolution. E.g. nslookup google.com
What is dig and how to use it?
Dig command is used in Linux systems to check DNS resolution. E.g. dig @[DNS IP] [domain name]
How to Flush DNS?
Open CMD as administrator and run command ipconfig /flushdns